Products

Product

Screw for Plastic Injection

Diameter:Φ10mm-Φ500mm; Material:38CrMoAlA; SKD61; SKD11; 40Cr; 42CrMo; High quality alloy steel; Technology:Nitriding treatment, alloy coating spraying, heat-treatment; Appliance:PP, PE, PA, PC, ABS, AS etc.

Screw and Barrel for Extruder

Diameter:Φ15-Φ300; L/D Ratio:15-46; Surface Roughness:Ra 0.4μm; Nitriding Fragility:Grade One; Nitriding Layer Depth:0.5~0.8mm

Tungsten Carbide Screw Barrel

Plastic Type:Thermoplastic; Available Diameter:18-150mm; Appliance:Engineer Plastic with Less Than 50%Gf; Processing Method:Spraying & Casting; Surface Hardness:HRC58-64

Screw Barrel for PVC Extruder

Treatment:38crmoala with Nitriding Treatment; Nitriding Time:96 Hours; Nitriding Depth:0.5-0.8 mm; Delivery Time:35 Working Days; Diameter Range:D115-D180mm

Screws Barrels of Rubber Processing Machinery

Type of General Rubber Machinery:Rubber Extruder; Surface Roughness:Ra 0.4um; Straightness :0.015 mm;

Copyright 2008,Zhoushan Jianghai Screws Manufacture Co., Ltd. All Rights Reserved.

Imprint | Copyright | Privacy | Terms of Use | Site Map