Technology Index:

Material	38CrMoAIA	Nitriding Layer Depth	0.5-0.8mm
Diameter	Φ15-Φ360	Nitriding Layer Hardness	HV≧900
Straightness	0.015mm	Cr-Plating Layer Hardness	850 HV
Surface Roughness	Ra0.4μm	Cr-Plating Layer Depth	0.03-0.10mm

 
Two stage granulator Screw Parameters

Model	Screw diameter(mm)	Aspect ratio	Yield(kg/h)	Screw speed(rpm)	Power(kw)
SJP-80-65	￠80、￠65	20:1～15:1	70-100	73	18.5-22
SJP-90-85	￠90、￠85	20:1～15:1	80-110	73	22-30
SJP-100-90	￠100、￠90	20:1～15:1	90-120	73	30
SJP-110-100	￠110、￠100	20:1～15:1	100-130	73	30-37
SJP-120-110	￠120、￠110	20:1～15:1	110-140	73	30-45

Screw Parameters host granulator

Model	Aspect ratio	Yield	Screw speed	Power	Center height
SJP-45	28:1	≈25-30	10-120	7.5	650
SJP-65	28:1	≈55-70	10-120	11	650
SJP-80	28:1	≈100-120	10-120	18.5	700
SJP-90	28:1	≈120-140	10-120	22-30	700
SJP-100	28:1	≈140-170	10-120	30	750
SJP-105	28:1	≈150-185	10-120	30	750
SJP-110	28:1	≈180-220	10-120	30-37	750
SJP-120	28:1	≈200-240	10-120	37-45	750
SJP-130	28:1	≈270-320	10-120	45-55	800
SJP-140	28:1	≈250-430	10-120	55-75	800
SJP-150	28:1	≈450-550	10-120	75	900
SJP-160	28:1	≈600-750	10-120	90-120	900
SJP-180	28:1	≈850-950	10-120	150	900